laboratory

lab

Our laboratories are equipped with the latest instruments and are operated by a highly qualified personnel to test all products on regular basis.

 DENSITY CHECK unit

The instrument enables the user to determine the density of a product by comparing the weight of thesample obtained in air using a precision balance and a reference liquid of known density.When the sample is applied on the special arm, the instrument automatically calculates the density.The instrument is also designed for use with samples of a lower density than the reference liquid

DSC00004

HARDNESS TEST UNITS

Hardness Check enables the user measure hardness. designed and manufactured by Gibitre Instruments S.r.l., in compliance with the specifications and test methods described in the reference international Standards. Hardness Units used for testing rubber and plastic according to different standards.

Instrument Reference Standard:

Shore A unit ISO 868, ASTM D 2240 (and similar)

Shore D unit ISO 868, ASTM D 2240 (and similar)

Shore A0 unit ISO 7619-1, ASTM D 2240 (and similar)

 

DSC00007

TensorCheck unit

The TensorCheck Profiles tensile tester is designed to carry out laboratory tests on rubber or plastic test samples.The tests, which can be carried out in the standard layout, are Traction, Tear and Compression (using specific clamps).Different tests can be performed (e.g. hysteresis, detachment, etc.).

DSC00006

lab

Comments are closed.